Service

Grout sealing and colour sealing in Darwin

Clean grout is the start. Sealing helps it stay that way, and colour sealing evens out stains that cleaning alone can’t shift.

Clear sealing

A penetrating sealer soaks into the grout and cuts down how much water, soap and dirt it absorbs. It doesn’t change the colour. Grout stays cleaner for longer and is easier to wipe down.

  • Best for: grout that cleans up well
  • Floors $5/m², shower $69, bathroom $99

Colour sealing

A tinted sealer is applied to each grout line by hand. It gives one even colour, covers stains that won’t clean out, and seals at the same time. It can match the original colour or change it.

  • Best for: patchy, stained or old grout that’s still sound
  • Floors $16/m², shower $189, bathroom $299

Why sealing matters more in the Top End

Unsealed grout behaves like a sponge. In a humid climate, a sponge in a warm bathroom stays damp for longer, and damp grout is where mould and mildew get started. Sealing doesn’t stop that completely, but it means less moisture and soap soak in, so the grout dries faster and marks wipe off instead of soaking in.

How sealing is done

  1. Clean first. Sealing is always applied straight after a full clean. Sealing over dirt locks it in.
  2. Let it dry. Sealer needs dry grout to soak in properly. On humid days we use the air-con or fans to help.
  3. Apply. Clear sealer is worked into the grout lines and the excess is wiped off the tiles. Colour sealer is applied line by line, which is why it costs more.
  4. Cure. Most products need around 24 hours before a shower is used. Floors usually take light foot traffic sooner. The cleaner will give you the exact time for the product used.

If the grout isn’t dry enough on the day, we won’t seal it just to finish the job. Sealing damp grout doesn’t work. We’ll agree a time to come back and seal, and the price doesn’t change.

When sealing isn’t the answer

Sealer and colour sealer only work on grout that is sound. If grout is cracked, crumbling, soft or missing, it needs replacing, and we don’t do regrouting. We’ll tell you honestly if that’s what we see.

Clean first, then seal

Grout like this is sealed once it is clean and dry, so the result lasts. Example results from professional tile and grout cleaning. Every job is different: tile type, grout age and how long it has been stained all affect what comes up, so we tell you what to expect before we start.

Questions about sealing

Does sealing stop grout going mouldy?

It helps but doesn’t make grout mould-proof. Sealed grout absorbs less water and soap, so mould has less to feed on and is easier to wipe off. Ventilation and regular cleaning still matter, especially in the wet season.

How long does grout sealer last?

It depends on the product, how much traffic or water the area gets, and what you clean with. A busy shower wears sealer faster than a hallway floor. Clear sealer typically needs re-applying every few years. Colour sealing usually lasts longer.

Can you seal grout without cleaning it first?

No. Sealing over dirty grout locks the dirt in. Sealing is always done straight after a clean, once the grout is dry, which is why it’s priced as an add-on.

Can colour sealing change my grout colour?

Yes. Colour sealing can restore the original colour or change it, for example from stained white to a mid-grey that hides marks better. Tell us what you’d like when you request a quote.

When can I use the shower after sealing?

Most sealers need around 24 hours before the shower is used again, and floors can usually take light foot traffic sooner. The exact time depends on the product, and the cleaner will tell you on the day.

Seal it while it’s clean

Add clear or colour sealing to any clean. We’ll confirm the price when you request a quote.

CallGet a quote